Memo on the storage of carved decor

This memo will allow you to keep products made by our company in proper form. Compliance with the recommendations on the storage and operation of purchased products ensures you their good condition for a long time.

For manufacturing products, high-quality dried wood with“ furniture moisture ”8 (± 2)% is used, from verified suppliers. In the production of glued products, KLEBCHEMIE M.G. glue is used. Becker GmbH & CoKG (Germany) KLEIBERIT 303.2. Bonding quality - D3. Hydraulic clamps with a specific pressure of 6 kg / cm2 are used for gluing joinery billets made of wood lamellas.

Wood is a living material. In dry or over-humid air, shrinkage / expansion (swelling) is characteristic of it. Wood, depending on the relative humidity of the environment, has the property of absorbing or releasing its own moisture.

RECOMMENDATIONS BUYER FOR STORAGE OF THE PRODUCT AND FINISH

To save a product IMPORTANT:

  • ENSURE STORAGE of products in rooms with air humidity between 40 - 55% and air temperature between +10 and +25 degrees Celsius.

    Dry air can cause cracking (including the appearance of microcracks) and deformation of the wooden decor. This is especially true in the winter, when the heating season begins, and the humidity in the room can drop to 15%.

    • TO AVOID drafts / water on the surface of products / mechanical damage / storage of products near heating appliances / long-term direct sunlight on products.

    Dry air can cause cracking (including the appearance of microcracks) and deformation of the wooden decor. This is especially true in the winter, when the heating season begins, and the humidity in the room can drop to 15%.

    • TO AVOID drafts / water on the surface of products / mechanical damage / storage of products near heating appliances / long-term direct sunlight on products.

      To minimize the risk of damage to the finished product, if the customer cannot store the product in the required temperature and humidity conditions, the product must be coated with paint and varnish materials, oils within 3 days after unpacking the product. Long storage without finishing is not permissible!

      It is important to know that many of the wooden decorative elements produced are quite fragile, an unacceptably active mechanical effect on them (blows, falls, bending, etc.) n.).

      RECOMMENDATIONS ON THE OPERATION OF THE DECOR (COMPOSED BY COLORED FURNITURE INTERIOR DESIGNS)

      The decor is made for indoor use, and operating them OUTSIDE the rooms (EXCEPT THE HOUSE THREAD) will result in damage to the products. Household carving should be covered with protective coatings.

      The environment has a great influence on the appearance and quality characteristics of furniture. Furniture products are sensitive to light, humidity, dryness, heat and cold, so it is recommended to avoid prolonged exposure to one or more of these conditions. This causes accelerated aging of the paintwork, warping and deformation of wooden elements of furniture, aging of upholstery materials.

      The period during which the furniture retains its beauty and good condition depends largely on its operating conditions. Follow the simple tips and you will keep the furniture in the best condition. We are sure that these simple recommendations will help you in the implementation of your unique projects!

      IMPORTANT TO AVOID:

      • drafts;
      • storage of products in the vicinity of heaters;

        Sudden temperature changes can seriously damage a product. The furniture / product should not be located less than 1 m from the heat source. Recommended air temperature during storage and / or operation: from +10 to +25 degrees Celsius.

        • hot items (irons, dishes with boiling water, etc.) or heating radiations (light from powerful lamps, unshielded microwave radiators, etc.) hit the furniture;
        • water hits the surface of products;

          The decor / furniture surfaces must remain dry.

          • direct sunlight;

            Prolonged direct exposure to sunlight on some areas may change color compared to other areas that were less exposed to radiation.

            • thermal, mechanical and other damage, including the fault of animals.

              Follow these simple technical instructions and the product will last you a long time